Cleaning Codes

Cleaning codes are established by the Joint Industry Fabric Standards Committee 

Note:  Pretest a small, inconspicuous area before proceeding with any step below. Clean spots or stains from the outside to the middle of the affected area, to prevent circling. Cushion covers should not be removed for laundering or dry cleaning. Hot water extraction or steam cleaning is not a recommended method of cleaning. Pile fabrics may require brushing with a nonmetallic, stiff bristle brush to restore appearance. To prevent overall soiling, frequent vacuuming or light brushing with a non-metallic, stiff brush to remove dust and grime is recommended. Overall cleaning by a professional furniture cleaning service only is recommended.

Cleaning Code: DC

• Dry Clean ONLY

Cleaning Code: S

• Spot clean only with a water-free dry cleaning solvent.
• Do not saturate or use water.

When cleaning a spill, blot immediately to remove spilled material.

Cleaning Code: SIB

• See inside back cover of sample book for detailed cleaning instructions.

Cleaning Code: WS

• Spot clean with upholstery shampoo, foam from a mild detergent, or mild dry cleaning solvent.
• Do not saturate.

Cleaning Code: W

• Spot clean only with a water based shampoo or foam upholstery cleaner.
• Do not oversaturate or use water, or use solvents to spot clean.
• Blot immediately to remove any spilled material.

Cleaning Code: X

• Clean only by vacuuming or light brushing with a non-metallic, stiff bristle brush.
• Do not use water or solvent based cleaner.

Flock Fabrics

• Spot clean only with a water based shampoo or foam upholstery cleaner.
• Do not over wet, or use solvents to spot clean.
• Use cautious agitation or rubbing while fabric is damp, as flock fabrics are sensitive to pile distortion and texture change with too much agitation.
• Use extreme caution if using a professional cleaning service.
• Allow to dry at least 24 hours before use after cleaning.